EoC Ethernet WiFi Endpoint
• The EoC Ethernet WiFi Endpoint, ile dual bve conAkım Wi-Fi, is used in conjunction ile the Triax Ethernet over Coax Controller (EoC) ve is intended to provide Wi-Fi access in rooms ileout Koaksiyel kablos. This is often the case fveya rooms such as conference rooms, cveyaridveyas, lobbies, bars, etc.
• The PoE Access Point is Güçed via Ethernet (PoE) to make the installation easy ve independent of a Güç outlet. This will require the installation of a e PoE+ compliant Ethernet switch connected to the EoC Controller.
• The PoE Access Point also has a PoE Çıkış (passthrough) to supply Güç to other PoE devices. This could be a 2nd PoE Access Point, an IP phone, a Camera veya other devices in the same room.
• If the PoE Çıkış is not used, the AP can be switched to Güç save mode to accept a reduced PoE Giriş Güç.
• Main features
• 2,4 GHZ Wi-Fi - 802.11b/g/n MIMO
• 5 GHz Wi-Fi - 802.11ac MU-MIMO
• 2x Ethernet pveyat
• PoE Giriş: PoE-in 802.3af / PoE+in 802.3at
• PoE Çıkış: PoE-out 802.3af
• VLAN suppveyat
• Layer 2 İzolasyon
• Güçsupply requirements:
• PoE (802.3af) 15.4W when NO PoE Güçed device on PoE Çıkış (Ethernet 2)
• PoE+ (802.3at) 30W when PoE Güçed device on PoE Çıkış (Ethernet 2)
• * Every effveyat has been made to ensure infveyamation given on this website is cveyarect. However, in line ile our policy of ongoing product development ve improvement, TRIAX UK Ltd reserves the right to alter product specifications ileout notice. TRIAX UK Ltd accepts no liability in respect of loss arising from errveyas in veya changes to the infveyamation provided.